Use this form if the comment contains offensive or otherwise inappropriate content. An email message will be sent to our moderators who will take appropriate action if necessary.

Write your message to the moderator below:

(Enter the numbers exactly as they appear to the left)

Comment text appears below:
Hey tim, if you used flat paint , you can use a "very fine sandpaper" and scuff up just that area (only so paint sticks), since there is no sheen you dont need to paint the whole area. also i strongly suggest waiting the "COMPLETE" dry time between coats. if you do it before (like some rushed jobs can get) you wont get full coverage because your really just keeping that 1st coat active...

i read you used a "semi gloss paint" if so. you will have to repaint the whole screen. any stopstarts or area you try to "touch up" will have a sheen break in it and be visible.

just out of interest why did you go for semigloss?
Visual Apex