Use this form if the comment contains offensive or otherwise inappropriate content. An email message will be sent to our moderators who will take appropriate action if necessary.

Write your message to the moderator below:

(Enter the numbers exactly as they appear to the left)

Comment text appears below:
A useful tip for getting a perfectly flat & smooth surface is to use a "guide coat" this is something I learned from years as a painter in a Auto repair shop. When the primer is dry, take a can of a dark colour spray paint (black, blue, brown etc) stand a bit back and spray a light mist coat on the whole job. The paint mist will settle into any dings or imperfections that will show up clearly as a dark area when you start sanding with a fine wet or dry paper on a rubber sanding block. Just keep sanding until the dark spot disappears and you now have a nice flat surface ready for the top coat.

Cheers, Buster.