Use this form if the comment contains offensive or otherwise inappropriate content. An email message will be sent to our moderators who will take appropriate action if necessary.

Write your message to the moderator below:

(Enter the numbers exactly as they appear to the left)

Comment text appears below:
Hi guys,

Something to share with you all regarding the projector's matching up with different screen... i have been using Kikuchi MTSR 90" HDAM screen for years and have no problem with my other Panasonic & Sanyo projectors. When I installed my Epson TW8200 (HK model no. which is equal to 5030UB), the image revealed a large area of light grey strips that looked like water mark.

The technical advice from Epson's professional was: it's the mismatch of my screen vs high lumens projector... thus this sort of optical "Newton Ring" occured. there's nothing I can do except changing a matching screen. Of course I was upset and asked for other possible alternatives, and the answer was no...

What I did figure was to try applying:

1) Polarizing filter that may help eliminating such optical effect, or

2) Readjust the Len Shift angles (vertically & horizontally) to see if it may help...

To my great surprise, I just merely reduced the zoom range from its widest 100% to 95% (i.e., screen width from 90" to 86"), the water mark disappeared!

Now I really understood why so many AV pals are fury about the so-called technical service from dealers...
BenQ