Use this form if the comment contains offensive or otherwise inappropriate content. An email message will be sent to our moderators who will take appropriate action if necessary.

Write your message to the moderator below:

(Enter the numbers exactly as they appear to the left)

Comment text appears below:
Hello guys! I live in Australia and recently built my own screen using fibro cement board [smooth side], 2.7m wide and slightly curved. I used Taubmans' acrylic, satin white paint with approx 5% matt black. As there is some ambient light when viewing in daytime, the combo of curvature and minimal off-white satin paint enables my screen to perform almost as good as at night and for both conditions there is no downside whatever! My first and only projector is the BENQ 1070 which is a truly near perfect image maker. My screen has fixed horizontal masking with vertical sliding panels to mask 16:9 to 2.4 aspect ratios. So, there you go, a great result for me and perhaps others!
BenQ