Use this form if the comment contains offensive or otherwise inappropriate content. An email message will be sent to our moderators who will take appropriate action if necessary.
 |
|
|||||
|
||||||
|
|
|||||
|
||||||
Use this form if the comment contains offensive or otherwise inappropriate content. An email message will be sent to our moderators who will take appropriate action if necessary.
|
||||||||||||||
 Popular Projectors:Where to Buy:Research: |
| |||||||||||||
I guess performance is by company is somewhat relative to model and even each unit. I have had a Sanyo projector for 3 years (plv-60) and have had a number or problems with it. It got lots of dust accumulation inside, though the filters were cleaned regularly. Then it developed a problem where it began displaying alternating red bars next to dark-light transitions. I sent it to Sanyo and they claimed it was out of warranty, even though I had the original receipt showing it was only two years old. They were supposed to have fixed it (not under warranty, at my cost - I had removed the cover to blow out the dust, and foolishly told them so), but image problems were still present, and now about 9 months later, the original problem is back. I have also read of problems with the PLV-70 blowing bulbs a lot due to heat problems. The moral of the story is that different models by the same brand may vary quite a lot.