Use this form if the comment contains offensive or otherwise inappropriate content. An email message will be sent to our moderators who will take appropriate action if necessary.
 |
|
|||||
|
||||||
|
|
|||||
|
||||||
Use this form if the comment contains offensive or otherwise inappropriate content. An email message will be sent to our moderators who will take appropriate action if necessary.
|
|||||||
Hello Justin I have a projector in my living room which sometimes has low level lighting in it and use a panasonic ptae900e projecting about 13 feet ( half way along the rooms length) onto a screen. I sometimes have the room totally dark ( late on winter nights) but more often there is light at the back of the room or shining in from the hall. Anyway I at first made my own screen from white blackout lining mounted on 2 battens which were wrapped in black felt and that worked ok. However i got way better brightness and contrast with a da- lite cosmopolitan electrol 106inch diagonal with high contrast matt white screen material. The high contrast matt white is ( oddly) slightly grey and gives fair contrast even with ambient light but is not too high a gain so no hot spots. In addition i found the instructions on the da lite site very easy to follow and installed the screen and wired the ( separate) remote control , motor controller unit myself which avoided an install charge. If however you are not competent with working with electricity ( i am an engineer) it may be safer to have someone else handle that end of things for you. good luck