Use this form if the comment contains offensive or otherwise inappropriate content. An email message will be sent to our moderators who will take appropriate action if necessary.

Write your message to the moderator below:

(Enter the numbers exactly as they appear to the left)

Comment text appears below:
I used a foam roller when I redid mine after using a 3/16 nap roller. In my opinion the foam rollers looks slightly better. Not by much though.

After attempting to sand down the small dimples from the 3/16 roller, which left the screen uncceptable, and applying about four to five additional coats with a foam roller, the screen is finally acceptable, however it is not perfect. Having done all this work I have only about $50 into the entire project looking back I think I would rather have spent 200 on a fixed frame screen. However I've come this far I might try to stick it out