Editor's Choice
Performance
Features
Ease of Use
Value
Intended Use:
Home Theater
Sony VPL-VW600ES Projector Sony VPL-VW600ES
(add to Compare List)
Go to My Compare List

200000:1 Contrast Ratio
1700 Lumens
Full HD 3D
Street Price: n/a
$14,999 MSRP

Sony VPL-VW600ES
Native 4K SXRD Home Theater Projector

Bill Livolsi, January 15, 2014

Conclusion

Combining a native 4K light engine with all of the features and functions that have made Sony home theater projectors popular in the past, the Sony VW600ES is a total package. It contains every major advancement in home theater projector technology made since the advent of high definition, and most of these systems are executed quite well. The choice to focus on up-conversion of non-native content was the right one, and as a result the VW600ES is a worthwhile projector even for those who never intend to watch a single 4K movie. Every piece of content sent through the VW600ES is improved.

Quite often, early examples of any new technology are more tech demos than a finished product. The Sony VPL-VS600ES breaks that mold. Not only is the VW600ES a fully featured 4K home theater projector, it is also worth every penny of its asking price, even with 4K content being as scarce as it currently is. If you have $15,000 to spend on a projector, the Sony VPL-VW600ES is the projector to buy.

Previous Page
Shootout vs Runco X200i
Review Contents: The Viewing Experience Setup and Configuration Key Features Performance
  Limitations Shootout vs Runco X200i Conclusion

Reader Comments(16 comments)

Posted Jul 14, 2014 11:58:12 AM

By UHDGuru

Post a Comment Alert Moderator
mmm...when reading this..why pay for future equipment,and with this- pay and support development? 4K = 720p (and 6K) 8K = 1080p 8K Will be standard. problem solved.

Posted Apr 1, 2014 7:34:22 PM

By Doug

Post a Comment Alert Moderator
Regarding 20/20. The optician's test image is a Snellen eye chart. At 20/20 the letter "E" has bars 1 arcminute thick and the two gaps between the 3 bars are also 1 arcminute (5 arcminute high total). Also the contrast is good and the background is 100 foot lamberts (i.e. brighter than typical for video projected images and TVs which gives the eye better acuity). However there is more to the story.

First, if the resizing is a weighted blending of the original pixels (bi-linear interpolation), then letters of a 20/20 eye chart would have fuzzy edges (if the displayed pixel overlapped half a dark original pixel and half a light pixel, then the bilinear interpolated output pixel would be gray). Thus 4K resolution projection would suffer only half the degradation that a 2K projector would suffer. In other words, the letters of a 20/100 resolution eye chart will be a little sharper but for the highest displayable resolution eye chart it will be a lot sharper.

Second, the eye has much higher vernier resolution and can discern if a line has a 12 arcsecond step displacement. That means the eye is very sensitive to aliasing artifacts. A 4K display would inherently have only half the angular magnitude line displacement of a 2K display. (Although line displacements will be less, they can still be visible since the displayed pixels are still larger than 12 arcseconds. Antialiasing algorithms hide these artifacts but somewhat blur the image. On a pixel basis, double display resolution allows these artifacts to be hidden with antialiasing pixel processing that is only half as blurry.

Third, if the resolution is twice as high, then motion blurring is twice as noticeable. Thus, if your eye gaze follows numbers across the screen (e.g. football jersey or stock market data scrolling across or film credits scrolling down), then the eye is blurring twice as many pixels together. This means at 4k, 240 Hz motion blur reduction is required to attain the same affect as 120 Hz MBR at 2K resolution. The good news is this is only a fair comparison when the numbers on the 4K display are half the angular size as on the 2K display and you are expecting to see them equally well. If both projectors display the same image of a moving 20/40 Snellen eye chart, then of course the high resolution projector will suffer motion blur no more than the 2K projector even when both are MBR at 120 HZ. However do not expect to then switch the 4K projector video to a 20/20 Eye chart moving at the same angular rate across the screen with the same clarity as the 20/40 video on the 2K projector unless you also run the 4K projector at double the motion blur reduction rate. On a 4K display, when motion blur occurs, the temporary resolution degradation is much more noticeable.

Posted Mar 20, 2014 5:52:53 AM

By Tom Collins

Post a Comment Alert Moderator
This makes it too slow for gaming, at least when non-native sources are used.

was wondering what the input lag would be with a native 4k signal from a extremely high end PC?

Posted Mar 17, 2014 11:30:49 AM

By Ebase131

Post a Comment Alert Moderator
That 120 ms input lag is a deal-breaker. Very disappointing that even in game mode it is still that bad. Makes the projector unplayable and strictly a movie/TV watcher which is not how I would want something that costs $15k to function.

Posted Jan 29, 2014 7:29:08 AM

By Jim Terry

Post a Comment Alert Moderator
Will you be testing the Sony VPL-VW1100ES projector? I can find very little information on this projector except from Sony itself.

Posted Jan 27, 2014 4:12:28 PM

By Reuben Ahmed

Post a Comment Alert Moderator
$15000 MSRP is not a bad price. If the street price is lower, for an early adopter whose main hobby is projection technology - it is doable. I would consider this technology if it can be had for under 10K.

Posted Jan 25, 2014 11:41:39 AM

By Edlantis

Post a Comment Alert Moderator
What is the range on the zoom lens (range of throw ratios)?

Posted Jan 21, 2014 7:32:12 AM

By Vlad

Post a Comment Alert Moderator
"Game mode is very bright, has a blue tint, is comparatively lower in contrast, and does not offer any benefits to input lag"

It's a pity! Game mode almost useless due to input lag.

Posted Jan 18, 2014 9:36:36 PM

By Frank

Post a Comment Alert Moderator
No idea how the Runco came into the picture here, based on its description (HD rez, single chip DLP, color wheel, etc), it seems to be priced about $11,500 too much.

Posted Jan 18, 2014 9:23:30 PM

By Stunko

Post a Comment Alert Moderator
Wow, where to begin?

Ceilings mounts are NOT considered "professional" as far as installations go. Having the PJ behind the rear wall in a separate booth is considered much more professional. Particularly in a dedicated screening room.

No idea why this particular Sony PJ would need any more of a professional installer installation than any other HTPJ. I mean, it is just a 1700 ANSI lumen HTPJ, folks.

And that brings me to the nitty-gritty of it: fifteen-thousand dollars -- for this? Nay.... check back in 2-3-4 years time, prices by then will be under $4,000, for sure. With other players in the game, not just mega-Sony. For now, the ticket is with the 4K UHD TV, now that prices have dropped below the $1,000 mark on some of them. Great review, though, the shape of things to come, surely.

Posted Jan 17, 2014 1:15:53 PM

By Derrick

Post a Comment Alert Moderator
Great review. I gave up on watching the 4K content from the media server as it's too expensive ($30 or more for some stuff)but mainly because Bluray movies look fantastic and so do the NFL night games. Day games are ok but the night games are great. It was nice to read about all the various features and how each feature changes the projector/picture as the manual is lacking in this area. Also, you did a great job explaining eye sight/vision. Your the only reviewer to do this other then my eye doc. My vision was 20/10 until recently and then it changed to 20/25 over a few years. The eye doc got my vision corrected back to 20/10. The difference is very noticeable from 18' on the 133" screen, and now I understand (somewhat) the reason. This projector is a game changer and it will be interesting to see how other manufactures react as the current street price of the projector is under 11K; still a lot of money but this projector has only been out a few months. Great review.

Posted Jan 16, 2014 1:41:49 PM

By Foxman

Post a Comment Alert Moderator
Thank you for your response. It is evident I need a refresher course on upscaling. I also need to go back and see if my 5-year-old home theater system is calibrated correctly!

Posted Jan 16, 2014 9:55:17 AM

By kevin prouten

Post a Comment Alert Moderator
It contains every major advancement in home theater projector technology made since the advent of high definition

with the exception of a long lasting led / laser light source !!!!

Posted Jan 16, 2014 9:29:53 AM

By Bill Livolsi

Post a Comment Alert Moderator
Foxman - it appears we've crossed a wire somewhere. When you're talking about digital projectors, all non-native signals need to be scaled to fit the native resolution of the projector. We experimented with scaling by setting our Oppo BDP-103 to output 4K, then switching it to output 480p (thereby allowing the VW600ES to handle its own scaling). In the past, projectors did not have the greatest upscaling capabilities, so it was frequently beneficial to add either an upscaling DVD player or a separate video processor. The VW600ES has excellent internal scaling that is variously on par with or superior to the scaling in the Oppo BDP-103, which is itself top notch.

Reality Creation, on the other hand, is not upscaling. Reality Creation is a detail enhancement system similar to Panasonic's Detail Clarity or Epson's Super Resolution. It makes the picture appear sharper, clearer, and higher in detail. You can apply Reality Creation to the picture regardless of where the scaling is performed.

Posted Jan 16, 2014 8:07:05 AM

By Foxman

Post a Comment Alert Moderator
A great review! I am surprised about the upscaling quality of standard DVD material with this projector. I would have thought the higher resolution would have made DVDs look even worse. Could you please explain your comment about the projector upscaling nearly as well as your Oppo Blu-ray player? Were you going back and forth with the Oppo's enhancements on and the Sony's Reality Creation off and then vice versa? I have often wondered what determines the best quality from a standard DVD...the projector or the player. To take it a step further, what would happen if you ran a standard DVD source through the Oppo and the Sony with the enhancements and Reality Creation both on? Would the clarity improve even further, or would it reach a point of overkill? Thanks in advance for your response.

Posted Jan 15, 2014 12:52:11 PM

By AVGuru

Post a Comment Alert Moderator
Still glad I picked up my brand new Sony Sony VPL VW1000ES for a hair under $14k.

Post a comment

Commenting on this article is easy and does not require any registration. Your email address is necessary for you to activate your comment once it has been submitted. It will not be shown to other site viewers. ProjectorCentral reserves the right to remove any comment at any time for any reason. Foul language is not permitted, nor are personal attacks. All comments should remain on topic.

Name:

Email Address:(used only to confirm your comment)

Your Comment:

(Enter the numbers as they appear to the left)