Barco G62-W11-W 0 1 WUXGA DLP Laser Projector
Our Take

Providing more than enough brightness to fill the screen of an auditorium, lecture hall or mid-sized church, the 11,500-lumen Barco G62-W14 is a relatively compact and lightweight powerhouse.

  • Small case for its brightness class
  • Excellent network control options
  • Wide assortment of available lenses
  • HDR capable
  • Lacks Wi-Fi
Barco G62 W14 front right

Rated to deliver 11,500 ANSI lumens (13,600 ISO), Barco's G62-W14 large venue projector should be plenty of brightness for businesses, schools and houses of worship. It's a highly capable projector with a relatively small footprint and light weight for its brightness, extensive network control options an excellent assortment of available lenses.

Priced at around $17,500 MSRP without a lens, and as little as $16,800 on the street, the G62-W14 is similar in output and intended audience to several projectors that share a comparable footprint and weight in this WUXGA-resolution, single-chip DLP brightness class. Most aggressively priced is Panasonic's PT-RZ120BU, which carries a typical street price around $17,000 with an included standard zoom lens. It's rated at 12,000 ISO lumens or 12,600 Center lumens vs. the Barco's 13,600 ISO/12,800 Center lumens (we measured 12,249 ANSI on our sample), and the Panasonic lacks the support for high dynamic range (HDR) content offered by Barco and some others.

Other major competitors include the Christie DWU1400-GS (14,250 ISO, 12,000 ANSI) at approximately $19,700 sans lens, and the Optoma ZU1300 (14,400 ISO, 12,000 ANSI) at $18,000 without a lens; both are more expensive than the G62-W14. Let's take a closer look now at the Barco.


Barco G62 W14 front

No matter how you slice it, Barco's G62-W14 packs a lot of projector into its case. Available in black or white, the projector has a solid, well-made feel to it and should fit into anything from a church to a school lecture hall to a large conference room or auditorium at work. While it can be a handful at 7.7 x 20.8 x 19.1 inches and 50 pounds, the G62-W14, introduced last July, fits right into the newest generation of high-output, small-case projectors. Some similarly spec'd, earlier generation models from not too long ago were 35% larger and twice as heavy.

Still, it's a good idea to have at least two people on hand for installation. The G62-W14's adjustable feet add 0.4-inches to its height and allow the projector to be set up on a tabletop, shelf, or projection booth. Underneath, there're four attachment points for hanging it from a ceiling; it worked well with my generic mounting bracket.

Able to project up to 4K, the G62-W14's native WUXGA resolution should be fine for most business, school or church uses. Under the skin, the projector is lit with a powerful sealed blue diode laser array. Part of the beam is sent to a phosphor wheel that creates a stream of yellow light, which is broken into red and green components with a pair of color filters. The beams converge on the G62-W14's 0.67-inch DLP imaging target and on to the projector's output lens.

Its illumination components are rated to last 20,000 hours of use. That means years of service without having to change a lamp. To prevent overheating, the G62-W14 needs 40-inches of clearance but it can be mounted at any angle, including a portrait mode for showing a tall logo or person's picture.

There are eight Barco G lenses available, ranging from ultra-short to ultra-long throw designs that cost between $1,920 and $15,200. I used the $1,920 standard throw lens that can fill a 4- to 25-feet screen with a throw ratio that ranges from 1.22 to 1.53:1. Its powered 1.25X zoom optics are a little on the short side compared to the 1.5X and 1.6X zoom of some others but helped with getting the image to fit the screen. The lens settings can be electronically locked, and the projector includes two shrouds to accommodate different lenses.

The G62-W14's motorized image shifting can be adjusted with the remote control, moving the projected image up-down by as much as 100 percent and right-left by 30 percent with the lens I used; other lenses have a narrower range of motion. The projector has horizontal and vertical keystone compensation for up to 30-degrees.

In addition to Warm, Cool and Standard white balance options, the G62-W14 has detailed adjustments for gamma and a Dynamic Contrast setting. There's warping and pin cushioning control as well as Picture-in-Picture (PIP) and Picture-by-Picture (PBP) presentation. The six Color Modes are tuned to specific types of projected material, and the G62-W14 can compensate for being projected onto a colored wall, with settings for Blackboard, Light Yellow, Light Green, Light Blue, Pink and Gray. It has a built-in Blending mode as well for multi-projector arrays.

The projector's video ports include two HDMI (version 2.0 for compatibility with 4K/60Hz signals), DVI-D and 3G-SDI inputs as well as an HDMI output for driving a display in a lectern, projection booth or an overflow room. There are 3D synchronization jacks for an emitter, an RS-232 serial port for controlling the projector, and a 12-volt trigger for wiring to a powered screen. 3.5mm jacks on both the projector and remote control allow the two to be hard-wired if the G62-W14's remote control is to be used beyond wireless range. The projector has a Type A USB port for powering a streaming module.

There're two RJ-45 ports, one of which is dedicated for bringing in an HDBaseT signal for uncompressed video or controlling the projector. The other is a LAN port that links the projector with a facility's wired network to remotely monitor and adjust the projector's parameters through a networked browser window. The projector's manual didn't contain the needed password, though (hint, it's "admin@g62").

Barco G62 W14 lan

The browser-based interface provides an exceptionally wide assortment of adjust-anywhere items, starting with the Barco Main window that allows turning the projector on and off, switching Color Modes or adjusting 3D operations. In addition to changing the gain of individual colors, a networked projector allows for remote keystone correction, or modifying the color temperature, as well as making brightness and gamma changes. The G62-W14 works with PJ Link, Extron and AMX control software. On the downside, it lacks Wi-Fi to tap into a wireless network, so any local sharing from mobile devices or laptops will have to be facilitated with a third-party wireless HDMI or other casting solution.

Barco G62 W14 front remote

For multi-projector setups and fleet management, the G62-W14 is compatible with Barco's free Projector Toolset software, which allows management of multiple projectors via the network or RS232 connection and assists with blending and warping in multi-projector installations. There are tools for brightness settings, diagnostics, image tweaks, and picture-in-picture control. For large fleets spread over multiple locations such as a museum or school environment, it provides rapid one-button power-up and power-off from a central location.

Furthermore, the Barco G62-W14, along with all other G-series Barco projectors, is now compatible with Barco's Insights Management Suite, the company's proprietary cloud-based fleet management and remote monitoring application. This tool was introduced and previously restricted to Barco's flagship models but has now migrated down. Accessible from any device with internet access, it provides a live dashboard with real-time information on the operating and environmental conditions of your full fleet of projectors, and delivers automatic e-mail notifications to alert managers to any developing issues with a projector's health.

The rear-mounted control panel can power the projector up as well as select the input, focus and zoom the image. It has the expected four-way control and Enter buttons, as well as LEDs to show if it's powered, its status and whether it has been AV Muted. Incidentally, like most other large venue projectors, the G62-W14 lacks built-in audio or a speaker and needs to rely on a room's sound system.

It's easier to use the backlit remote control, which adds dedicated buttons for adjusting the image's brightness and contrast. It can cycle through the input choices but lacks dedicated input keys. There are a dozen built-in test patterns, including grids, full field images and color bars, which helped me to get the image on-screen. It uses a pair of AAA batteries.

Barco's three years of coverage is adequate in this genre and generous compared with some, though it does pale next to the five-year warranty on some commercial projectors such as those from Sony.


Color Modes. As expected, the Barco G62-W14 has several presets for getting the most out of a variety of different projected material. Its six Color Modes include Presentation, Bright, Cinema, sRGB, Dicom Sim and HDR, although the latter was grayed out until I connected an HDR10 video source.

Using a UHD computer source whose output was downscaled to WUXGA resolution at 60 Hz, I watched a variety of material, including nature movies, instructional videos and inspirational programming. Through it all, the G62-W14 did well with smooth video and vivid colors.

Presentation Viewing. As its name implies, the Bright mode lit up the room at 12,249 ANSI lumens in our test sample. That's 6% over its 11,500 ANSI lumen spec and close to its 12,800-lumen center spot rating. On the other hand, as is common with the brightest mode in many projectors, its appearance in that mode was too cold and blue to show accurate skin tones or nature photos.

The Presentation mode is warmer, yielded 10,192 ANSI lumens and made colored type pop from a white background. It worked well for PowerPoint presentations, Excel spreadsheets and school-oriented items like the University of Colorado's PhET science simulations.

The Dicom Sim mode supplied 10,904 ANSI lumens. It enhances contrast for viewing medical scans in a nursing program or hospital auditorium.

Video Viewing. Meanwhile, the Cinema mode warmed up the appearance of the imaging significantly without adding too much pink. It worked well for a variety of movies and online videos, putting out 7,874 ANSI lumens. For instance, in the opening scene in Crimes of the Future, the G62-W14 did surprisingly well with accurate skin tones for a boy on the beach and a lot of texture shown on the sand, stones and water.

Barco G62 W14 front left

The G62-W14 lacks a dedicated Rec.709 mode but its sRGB setting is close, and was the most faithful color mode for skin tones, grass and sky. It should be fine for watching a remote teacher on a video call, a Web campaign or a video feed of the choir. It sent 7,898 ANSI lumens to the screen.

Finally, I connected the G62-W14 to my 4K UHD Blu-ray player and used the Spears & Munsil UHD HDR Benchmark disc to sample some 4K HDR content. The projector's HDR fine-tuning controls include options for Bright, Standard, Film, Detail and Auto. In Auto, it lowered the projector's output to 5,476 ANSI lumens—half the G62-W14's peak brightness, though. Watching BBC's Perfect Planet disc in HDR Auto mode delivered extra highlights as well as vivid reds and oranges for volcano scenes, vibrant greens for forests and saturated sky blues.


With plenty of brightness to put a variety of material on a screen at school, work or a house of worship, Barco's G62-W14 should be more than enough to get the point across. Furthermore, it is one of very few models in its class that can make the most of HDR-encoded material, and has among the more thorough networked browser windows and fleet management options for adjusting parameters from across the room, building or campus. Unfortunately, it lacks wireless network capabilities, but that's not totally uncommon among large-venue projectors at its brightness and may not be an issue outside of a single-classroom environment. All together, the G62-W14 amounts to well-rounded package that competes well on price while offering Barco's well-respected build-quality and support.


Brightness. Though we can't make generalizations about brightness beyond our singular test sample, the Barco G62-W14 unit I evaluated hit a peak of 12,249 ANSI lumens, well above its 11,500 ANSI lumen specification. This should be enough for most medium-sized auditoriums or houses of worship. Using the Presentation mode reduced the output to 10,192 ANSI lumens while delivering a less-cold feel. It worked well for graphics and tabular material.

In Cinema mode, the projector put 7,874 ANSI lumens on screen with a quality of light that was warmer without being obviously pink. Its sRGB mode had the best color balance with reasonably accurate skin tones, foliage and sky and delivered 7,898 ANSI lumens. Using HDR encoded material, the G62-W14's HDR mode made the colors more vibrant and saturated while making highlights stand out. It yielded 5,476 ANSI lumens to our test screen in its Auto mode. For those considering the G62-W14 for use in a hospital, nursing program or medical school, its Dicom Sim mode yielded 10,904 ANSI lumens of light.

The projector's ECO Mode lowers its output and fan noise to save power and electricity. It reduced the G62-W14's brightness by 48% percent to 6,552 ANSI lumens vs. full power.

Barco G62-W14 ANSI Lumens

Mode Normal Eco
Presentation 10,192 5,300
Bright 12,249 6,369
Cinema 7,874 4,094
sRGB 7,898 4,107
Dicom Sim 10,904 5,670
HDR (Auto) 5,476 2,847

Zoom Lens Light Loss. We tested the G62-W14 with the model R9801784 Standard Zoom lens with a 1.25X rated zoom and 1.22-1.53:1 throw ratio. Moving the lens from its widest zoom to its full telephoto position resulted in a 25% loss of brightness.

Brightness Uniformity. The Barco's illumination engine and model R9801784 lens optics combined for a good 92.7% uniformity rating.

Fan Noise. With the ability to pump out more than 4,000 BTUs of heat, the G62-W14's fan was loud at maximum output. Using Bright mode, I measured 46.2dBA with a sound meter 36-inches from the projector's exhaust in a room with a background noise level of 38.3dBA. This can be reduced to 41.7dBA using Eco Mode but at the loss of about half the projector's light output. Barco rates the projector's noise level at between 37 and 42dBA using the industry-standard averaged measurement in a soundproof booth.

Input Lag. Using a Bodnar Video Signal Input Lag Tester and a 1080p/60 signal, the G62-W14 showed a lag of 55.7 milliseconds. The projector lacks a game mode or any other facility for further reducing latency.

Power Use. No surprise, the Bright Mode was a power hog, consuming 853 watts, which dropped to 818- and 823-watts in Presentation and Dicom Sim modes. The Cinema and sRGB modes used 648 and 635 watts, respectively. The projector had a standby idle power consumption of 4.1 watts. If it's used in Bright mode for 8 hours a day and 200 days a year, it should cost about $109 a year to use.

Temperature. During two weeks of daily use, the G62-W14 stayed cool. Its case never got above room temperature and the exhaust vent hit a peak of 92 degrees Fahrenheit.


Barco G62 W14 connections
  • HDMI-in Version 2.0 (x2)
  • HDMI-out Version 2.0
  • DVI-D Video
  • HDBaseT (RJ-45)
  • Wired Network (RJ-45)
  • Remote control extension (3.5mm jack)
  • Serial Port (RS-232)
  • 12-volt trigger
  • 3G SDI with synchronization
  • 3D Synchronization
  • USB Type A

For more detailed specifications and connections, check out our Barco G62-W11-W projector page.


Post a comment

Enter the numbers as they appear to the left