Highlights
From JVC — The JVC DLA-VS4010NLG is an advanced 4K2K projector incorporating three 1.27 inch 4K2K D-ILA display devices. It produces high-quality images for use in planetariums, museums, simulators, and medical institutions, as well as high-spec design & monitoring facilities. Its Blu-Escent laser-phosphor light source delivers 6,000 ANSI lumens with a stunning 10,000:1 native contrast ratio. Combining superb definition and resolution with low operating cost, the DLA-VS4010NLG achieves an ultra-high resolution of approximately 10 megapixels (4,096 x 2,400).
- Solid-state laser phosphor illumination system
- 4096 x 2400 pixels, 11% more vertical resolution & pixels than other 4K devices
- 3 Active Matrix D-ILA devices
- Light output: 6,000 ANSI lumens
- Contrast ratio - 10,000:1 (typical)
- RGB convergence in 1/10 pixel increments
- Input via 4xDVI-D, Single/Dual Link
- Communication - 100BaseT Ethernet, RS-232C, USB
Product Downloads
Helpful Links
JVC DLA-VS4010NLG Projector Specifications
- MSRP
- n/a
- Best Used For
-
Events/Staging
Museum/Exhibits
Simulation
Operations Center
- Brightness
- 6,000 Lumens (ANSI)1
- Resolution
- 4096x2400
- Aspect Ratio
- 16:9 (4K HD)
- Contrast
- 10,000:1
- Display Type
- 1.27" D-ILA x 3
- Color Processing
- 8-bit
- Video Modes
- 720p, 1080i, 1080p/60
- Data Modes
- MAX 4096x2400
- 3D Modes
- Full HD 3D
- Lamp Type
- Laser Phosphor
- Lamp Life
- 20,000 hours
- Included Lens
- No
- Optional Lenses
-
GL-MS4011SG Short Fixed Lens Throw Ratio 1.00:1GL-MS4015SZG Zoom Lens Throw Ratio 1.50:1-1.85:1GL-MS4021SZ Zoom Lens Throw Ratio 2.15:1-3.65:1
- Lens Shift
- Horizontal & Vertical
- Digital Keystone
- No
- Projector Size
- 12.50" x 26.00" x 36.80"
- Weight
- 162.0 lbs
- Audible Noise
- 52 dB
- Internal Speakers
- No
- Power
- 1,250 Watts 100V - 240V
- Connection Panel
-
DVI Digital Input x 4Network: RJ-45RS232: DB-9pinUSB
- Features
-
Full HD 3D
Compare to the Competition
Similar Projectors
ANSI LUMENS is the most commonly accepted industry standard brightness measurement. The ANSI lumen rating measures the brightest white that a projector can produce by averaging nine light meter measurements taken across the projected image.
Manufacturer Cited Brightness:
BUYER BEWARE Either this projector's brightness specification does not cite an industry-accepted unit of measurement, or according to our calculations it seems unlikely that this projector is capable of producing the manufacturer's cited brightness specification.
Manufacturer Cited Brightness: