ProjectorCentral.com
WORLD'S LARGEST
PROJECTOR RESOURCE
Celebrating 20 Years
Top 10 Find a Projector Reviews Throw CalculatorCalc Buyer's Guide Expert Blogs Projector Forums
My Compare List
Share:

Optoma UHD51ALV vs UHD51A Review

Best Home Theater Projector
Performance
4.5
Features
Ease of Use
Value
Intended Use:
DIY Home Theater
Optoma UHD51ALV Projector Optoma UHD51ALV
(remove from Compare List)
Go to My Compare List

500000:1 Contrast Ratio
3000 Lumens
Full HD 3D
$1,799 Street Price
$3,399 MSRP

The $1,799 Optoma UHD51ALV isn't a step up from the $1,699 Optoma UHD51A that we've reviewed separately so much as a step sideways. These two 4K UHD projectors are physically identical in every way but one. Instead of the six-segment RGBRGB color wheel in the UHD51A, the UHD51ALV substitutes an eight-segment RGBWRGBW color wheel.

That one change is responsible for virtually all the other differences between the two, including brightness—the only other difference that shows in the specs. They're both built around the same 0.47" DLP chip, use the same lamp, and have the same power consumption for each power mode. But white panels in the color wheel let more light reach the screen, and Optoma rates the UHD51ALV at 3,000 ANSI lumens compared with 2,400 for the UHD51A. We measured it at a little more than 2,800 lumens.

The choice of color wheel also affects color accuracy, giving the UHD51A a small edge on that score but nowhere near enough to rule out the UHD51ALV if you need its extra brightness. Using video optimized settings as the point of comparison, the UHD51A is bright enough to light up a 175" diagonal, 1.3-gain screen in a dark room or a 110" screen with moderate ambient light at the native 16:9 aspect ratio. Screen sizes for the UHD51ALV jump to 220" in a dark room and 135" in moderate ambient light.

With all they have in common, there's no reason other than the color wheel—and the differences it causes—to pick one projector over the other.

Optoma UHD51ALV

Optoma UHD51ALV Features

The only key features that differ between the UHD51ALV and the UHD51A are the first two on this list.

  • RGBWRGBW color wheel delivers good color accuracy with higher brightness than the UHD51A offers

  • Rated at 3,000 ANSI lumens, measured at 2,824 ANSI lumens

  • 3840x2160 resolution (4K UHD) delivers fine detail and crisp images

  • Voice control through Alexa and Google Assistant

  • HDR with four highly watchable modes; HDR 10 compatible

  • Dynamic black rated at 500,000:1 contrast ratio

  • Wide color gamut via HDR mode

  • Frame Interpolation to smooth motion; choice of three levels

  • Two HDMI 2.0 ports with 4K UHD, HDR support

  • 1.3x zoom lens

  • Modest vertical lens shift

  • Full 3D with DLP Link glasses

  • 4000 hour lamp life with full power, 10,000 hours in Eco mode, 15,000 hours in Dynamic mode; replacement lamps cost $199.

  • Two 5-watt stereo speakers deliver usable sound quality and enough volume to fill a small to mid-size room

  • Built-in USB media player supports 4K video playback

  • Wireless display from mobile devices with an optional Wi-Fi dongle

Optoma UHD51ALV Limitations

Limitations are also nearly identical for the UHD51ALV and UHD51A. The only difference between them in this list is the UHD51ALV's slightly slower input lag.

  • No keystone correction

  • Low brightness uniformity for the price

  • Does not support Hybrid Log Gamma, the emerging HDR standard for broadcast TV

  • Input Lag of 71 ms is too slow for serious gamers

Optoma UHD51ALV Performance

Brightness. With the test unit's zoom lens at the widest angle setting, we measured ANSI lumens for Bright and Eco power modes as follows:

Optoma UHD51ALV ANSI Lumens

MODE Bright Eco
Bright 2824 1862
Cinema 1756 1158
HDR Sim 1189 784
Game 1523 1004
Reference 662 437

Low Lamp Mode. Compared with Bright mode, Eco reduces brightness by about 34%.

Zoom Lens Light Loss. In the full telephoto setting, the 1.3x zoom lens drops brightness by only about 12%. In most cases, this is a small enough drop to ignore when considering how far to position the projector from the screen for a given size image.

Brightness Uniformity. The test unit's measured brightness uniformity ranges from 64% at the wide-angle end of the lens to 71% at the telephoto end. This is similar to the UHD51A's result and a little low for a home theater projector in this price range. The variation is visible using a 100% white test image as being brightest at the center bottom and dropping slowly going up and to each side. Those who are particularly aware of low uniformity may find it annoying. With photorealistic images, however, most people will never notice it.

Video Optimized Lumens (SDR). A slightly tweaked Cinema mode is our pick for optimum video. Cinema does the best job of retaining the subtle gradients of light and color which make close ups of faces, for example, look more dimensional. It also delivers the closest color match to a reference image other than the much lower brightness Reference mode. Contrast, shadow detail, and sense of three-dimensionality are excellent once you adjust brightness and contrast, and blacks are suitably dark.

Colors are within a realistic-looking range even with default settings, but you can improve color accuracy with an easy-to-use RGBCYM color management system that provides tuning for hue, saturation, and gain for each primary and secondary color. Adjustments for gamma and color temperature are also helpful. The Brilliant Color setting runs from the default 10 (maximum) to 1 (off), but is best left at the default. Lowering it improves accuracy for some colors but hurts it for others.

At 1756 lumens with optimized settings, the UHD51ALV can light up a 220" 1.3-gain screen in a dark room or a 135" screen in moderate ambient light. In Eco mode's 1,158 lumens, the sizes drop to a still substantial 200" in a dark room and 125" with lights on. Starting with Eco mode also lets you move to Bright power mode as the lamp loses brightness with age.

For comparison, the UHD51A test unit's measured brightness for optimum video settings in full power mode is 1153 lumens—virtually identical to the UHD51ALV's video optimized brightness in Eco mode.

Color Preset Mode Performance. Cinema is the UHD51ALV's second brightest mode. Game and HDR Sim deliver less saturated color along with lower brightness. HDR Sim also loses subtle gradations, especially in midtones, making rounded objects like faces look flat. Reference has the best color match to a reference image, but all the other modes offer better contrast.

The brightest mode shows a green bias, as with most projectors. However, it is minor enough even with default settings to show with only some images. Most people will find Bright useable at least occasionally in rooms that require higher brightness for daytime viewing. Adjusting settings will also deliver more neutral color. Note that changing the brilliant color setting—usually the easiest way to improve color in the brightest mode—has no effect. Optoma says this is intentional, to ensure that Bright mode is always bright.

Frame Interpolation. The UHD51ALV offers the same FI capability as the UHD51A, with settings of Off, Low, Medium, and High. Low smoothes motion enough to notice while still showing a bit of judder in pans and in objects moving across the field of view. But there's little-to-no digital video effect, so no good reason to turn it off. High doesn't smooth motion completely, but it adds only a minor digital video effect. You might prefer a more aggressive FI for live and recorded video, but film fares better with this more subtle version.

4K HDR Performance. The UHD51ALV handles HDR just as smoothly as its near twin. It switches to HDR color mode as the only choice when it sees an HDR flag in the input signal, and it switches back to whatever color mode it was previously set to when the input changes back to SDR.

HDR mode has the same four settings as the UHD51A's HDR mode. However, it adds a visible difference between the Film and Detail settings, so at each step from Bright to Standard to Film to Detail, the image gets darker overall and shows less shadow detail separation. All four deliver a compelling picture with excellent contrast, dark blacks, and a good sense of three-dimensionality.

3D Performance. Like the UHD51A, the UHD51ALV is one of the few 4K UHD projectors that offers 3D at 1080p. As with any projector, 3D isn't at bright as any of the 2D modes, but as we found with the UHD51A, the brightness drops far less in 3D than with most projectors. In a side-by-side comparison with the UHD51A, the UHD51ALV is also significantly brighter for 3D, which is particularly welcome in rooms with ambient light. Both projectors support DLP-Link glasses only.

Performance for 3D is otherwise identical between the two projectors. I saw no crosstalk in my tests, just the typical hint of 3D-related motion artifacts, and a highly watchable picture even with default settings. The test units for both models also had the same problem of not always recognizing 3D input from Verizon FiOS, although they worked without problems with Blu-ray discs. Optoma says that it will have a fix available for both models shortly after this is posted. The update will download automatically to projectors already connected to the Internet to take advantage of Alexa or Google Assistant voice control.

Rainbow artifacts. Although almost all DLP projectors can show rainbow artifacts, I didn't see any with UHD51ALV, even with a contrasty black-and-white clip. In comparison, I saw fewer with the UHD51A than with many DLP projectors, but still saw some. Even if you see these artifacts easily, you may not consider them an issue with the UHD51ALV. If you're unusually sensitive to them or don't know if you are, try to find a dealer that allows easy returns so you can test it out for yourself.

Onboard audio. The UHD51ALV offers built-in stereo with two 5-watt speakers. Should you need to use it instead of an external sound system, it delivers usable sound quality better than that built into in many other projectors and enough volume for a small to mid-size room.

Fan noise. The UHD51A is rated at 28 dB in full power mode and 25 dB in Eco. You can hear it in quiet moments in a small room, but even in full power mode it is a low pitched, steady sound that tends to fade into the background, particularly in a family room with ambient noise. Optoma recommends using High Altitude mode at 5,000 feet and above. With High Altitude activated, the Eco mode is only a little louder than the full power mode with High Altitude mode off. Full power in High Altitude mode is loud enough so you might want to apply some form of acoustic isolation.

Input lag. With FI on or off, the projector measures 71 to 74 ms lag depending on the color mode, close to the 68-70 ms we found on the UHD51A. Serious gamers will want a faster unit.

Optoma UHD51ALV connection panel

Optoma UHD51ALV Connection Panel Inputs:

  • (2) HDMI 2.0 with HDCP 2.2; 1 with MHL
  • (1) VGA/component in
  • (1) USB A (reads files from USB memory)
  • (1) USB A (for optional Wi-Fi Dongle for mobile connection)
  • (1) LAN (network Control, Alexa/Google Assistant, firmware updates)
  • (1) USB A (for supplied Wi-Fi Dongle for Alexa/Google Assistant)
  • (1) 3.5mm stereo in
  • (1) 3.5mm stereo out
  • (1) S/PDIF optical audio out
  • (1) 12V Trigger
  • (1) RS-232 (control)
  • (1) USB A (Firmware upgrades)

Setting up the Optoma UHD51ALV

Throw Distance. The UHD51ALV has the same 1.3x zoom lens, lens shift, and lack of keystone adjustment as the UHD51A, which makes setup identical. The throw distance for a 130" 16:9 image ranges from about 11.5 to 15 feet. You can use the Optoma UHD51A Projection Calculator to find the throw distance range for the image size you want.

Lens offset. The lens shift is designed for placement on a low table or upside down in a ceiling mount. With the UHD51A right side up, the bottom edge of the image can be anywhere from even with the lens centerline to about 15% of the image height above the centerline.

With no keystone adjustment to square off the image, you should avoid putting the projector on a high shelf behind the seats or other positioning that will force you to tilt it up or down to hit the screen.

Our Take on the Optoma UHD51ALV

The Optoma UHD51ALV is a solid value, as is the UHD51A. But the different color wheels gives each one some important advantages over the other.

In a side-by-side comparison in a dark room, using video optimized settings for both projectors, the UHD51ALV delivers a touch better contrast, while the UHD51A offers more vibrant color and a closer color match to a reference image. It also maintains subtle gradations better, so close ups of faces, for example, look more three-dimensional than with the UHD51ALV. However, the UHD51ALV delivers accurate enough color for film and video to be well within a realistic-looking range. And without a side-by-side comparison, few people would notice the difference in gradations.

Optoma UHD51ALV front

With the lights on there's no obvious difference in contrast. However, the brighter the room, the more the advantage tilts towards the UHD51ALV. Its brighter image simply stands up better to ambient light.

For rooms that are bright enough to need either projector's brightest mode, the UHD51ALV has an even more decisive advantage. Not only is its Bright mode far brighter, but the color is much closer to neutral, which makes it far more watchable than the UHD51A's Bright mode (which has a much more obvious green bias). The extra brightness in 3D mode also makes the UHD51ALV notably more usable for watching 3D with ambient light.

Ultimately, the UHD51A's somewhat better color accuracy and ability to hold gradations makes it the better choice in most cases for traditional home theater. However the UHD51ALV delivers nearly as good color accuracy plus enough extra brightness to light up a larger-than-typical screen for home theater, or as much as a 135" 1.3-gain screen in moderate ambient light. That makes the Optoma UHD51ALV an obvious choice for a family room or living room, and an excellent value at $1,799.


You support ProjectorCentral when you buy
the Optoma UHD51ALV from these
authorized resellers.
Thank you!




OR get competitive price quotes
by email direct from Optoma dealers

Get an E-Z Quote
Comments (25) Post a Comment
Keith Posted Nov 13, 2018 6:34 PM PST
Are there any improvements to the light border on the 51ALV? Or is it identical to the other models? Is there a specific 4K projector you’d recommend for gaming in this price range?
Rob Sabin, Editor Posted Nov 13, 2018 6:40 PM PST
Keith, no difference on the border -- it's essentially identical in that regard to the UHD51A and like other projectors using this 0.47" DLP chip.

As for specific gaming projectors in this range, if we're talking about 4K models you will mostly see similar lag times, typically in the 50-60 ms range, which is suitable for casual gaming but probably too slow for hardcore competitive gamers. The Epson HC4010, with lag measured at 28.4, is actually fairly good among 4K-compliant projectors but still on the middling-to-high side for serious gamers. Among 1080p models, you can find measured lag times as low as 16 ms among some of the Viewsonics (PJD7720HD, PJD7828HDL) and Optoma models (HD143X and HD27HDR, for example).
Alex Posted Nov 14, 2018 7:06 PM PST
Considering purchasing either the UHD51 and the UHD51ALV. I use my current projector now mostly for sports, gaming, movies, anime, and streaming videos. Which projector would you recommend the UHD51A or 51ALV?
Rob Sabin, Editor Posted Nov 14, 2018 7:10 PM PST
Based on our findings, this decision should be based primarily on two key criteria. 1) Do you watch a fair amount in high ambient light? If you do, the very modest sacrifice in color accuracy in the ALV is well worth what you get with the extra brightness. 2) Do you watch a lot 1080p 3D? If you do, either in high ambient light or dark theater conditions, you'll also probably appreciate the extra light output in the ALV.

On the other hand, if you typically watch in a dark room with controlled lighting, and don't do a lot of 3D, you won't need the extra lumens in the ALV and the slightly better color accuracy in the 51A makes it the better choice. Also, note that neither of these projectors are good for hardcore gaming with their relatively high input lag, though they should be fine for casual gaming.
REP Posted Nov 14, 2018 8:55 PM PST
As for gaming lag, I heard some things can help reduce this. For example, connecting directly to the projector with a shorter HDMI cable, don't use power saving mode, don't use the projector's speakers, don't use a wireless controller, disable HDMI-CEC. Can you do all of these and see if it help reduce lag?
Rob Sabin, Editor Posted Nov 14, 2018 9:05 PM PST
These are interesting factors that I can see might have the potential to have some effect on the projector's response to certain commands, or during the HDMI handshake that takes place as a signal is being locked in, but I'm not sure any of it would significantly affect the actual time lag between signal-in and displayed-on-screen once you have a steady, locked in signal. Maybe using the internal speakers perhaps if the system is slowing the video to sync the audio, and maybe using a relatively short HDMI cable vs an exceptionally long one. Perhaps at some point in the future we'll be able to explore these questions.
Bob Posted Nov 15, 2018 11:35 AM PST
Specs say it supports FI in 2D and 3D, but owners say FI is greyed out in 3D mode. Optoma refuses to acknowledge it doesnt work in 3D mode. Can you please confirm it works. Thanks.
Rob Sabin, Editor Posted Nov 15, 2018 12:01 PM PST
Bob, I'll see what we can do now to confirm this. Both projectors are still in house.
Charles Zander Posted Nov 27, 2018 3:31 PM PST
One thing that wasn't mentioned here is the price. The ALV is right around $1800 where the regular 51A is on sale everywhere for just $1359. So I am torn about which to purchase. It seems the 2 projectors pretty much do the same things. I would love the 3000 lumens but is it worth over $400? Thoughts?
Rob Sabin, Editor Posted Nov 28, 2018 5:36 PM PST
Charles, our evaluation suggests it's only worth it if you really need the extra light output. If you're in a dark room, save the premium and buy the 51A; you won't be using the full output of the projector anyway in the preferred viewing modes, and you'll get a wee bit better color performance. If you watch in high ambient light, the extra lumens in the 51ALV may very well be worth the extra cost. That's where you'll notice it. Just amortize the additional cost over the many hours of better, punchier viewing you'll enjoy over the life of the projector.
Keith Jordan Posted Nov 29, 2018 1:19 PM PST
Reviews for projectors like this one with high input lag, always say they are not acceptable for hardcore gamers but would work for casual gamers. What is being defined as hardcore gamer/ casual gamer. Does hardcore only mean someone playing competitively online?
Rob Sabin, Editor Posted Nov 30, 2018 7:35 PM PST
Keith, I'm not a gamer myself, but I think you're assessment is accurate in suggesting that a couple or three dozen milliseconds of delay would only be noticed by the very steady gamer frustrated by his or her inability to keep up with competitors working on different systems and different displays. Two competitors in the same room watching the same display are equally affected by the projection.

I will also add some perspective offered by our reader Manfred, who commented as follows on the matter of input lag in response to our review of the Epson HC4010, which measured 28 ms of lag:

"In regards to input lag, like brightness and uniformity, it needs context. As a movie buff but also an avid gamer (consoles & PC) this was a critical metric for me.

Sourcing from multiple sites, the fastest 4k large format TVs in 2017/2018 reviewed as excellent for gaming range from 12ms - 32ms. In 2016 it was 19ms - 35ms. 5 years ago anything below 40 was considered great and 70 was acceptable!

While the HC4010 is towards the lower end of what's considered great for 2018 it's still considered great!

As far as pro gamers go: Games are locked @ 60 or 30 for competition. With pro gaming montiors or the fastest large 4k TVs, you're 1 frame slower at 60 and its a wash @ 30. Imperceptible for most. If youre competing you're not using a projector anyways."
Guy Rotenberg Posted Jan 12, 2019 7:13 AM PST
I am considering this model mostly for 3D. I have the JVC X500 and the 3D on it is very dim. I wonder if because it's a 4K projector, I can connect it to a computer in 4K mode, put a SBS movie in a 4K frame (better than 1080P) and switch to 3D mode to see more detail?
Rob Sabin, Editor Posted Jan 12, 2019 11:25 AM PST
Guy,the relatively dim 3D on the JVC X500R you mention is the fault of its relatively low (by today's standards) lumen output. It's rated for 1,300 lumens brightness, which is nearly 1,000 lumens short of what JVC's newest top models produce as well as many modern competitors. For a projector that was first produced for the 2014 model year,that's to be expected.
yang Posted Feb 12, 2019 9:07 PM PST
Hi,can anyone help me make up my choice between Viewsonic 727 and this Optoma 51ALV? There is a $300 price difference. Can the features justify the price difference? Thanks.
Evan Cirelli Posted Apr 19, 2019 12:53 PM PST
Does this support HDR from a Roku unit to watch movies that have HDR?
Rob Sabin, Editor Posted Apr 19, 2019 1:53 PM PST
Evan, in order to be able to watch 4K HDR programming from the main streaming services you need two things: a 4K compatible streaming media player (i.e., one of Roku's UHD/HDR compliant models) and a display that can handle 4K/UHD content with HDR at 60 Hz. Anything less and the main 4K streaming services (Netflix, Amazon Prime, Vudu) will downgrade the signal and either make it 1080p or strip away the HDR and wide color gamut while retaining 3840x2160 resolution at a lower frame rate.

I believe the 51A and 51ALV have full 18-gbps bandwidth HDMI 2.0 ports, which is required for this, but I'm not 100% sure and no longer have a sample on hand to confirm this. Perhaps one of our readers with this projector can do so.
jason hendry Posted Apr 27, 2019 2:46 PM PST
I am thinking of buying one of these two projectors but trying to decide. I love 3D and it's a big part of the reason I went the projector way, but I also want color vibrancy.

For me it comes down to one issue: which one is more likely to show rainbow effect? I have seen it in the past and its annoying, but that's back 10 years ago and not even with an HD product.

I have a feeling the 51ALV version would help a lot on the rainbow effect. Am i right thinking that?
Rob Sabin, Editor Posted Apr 29, 2019 2:08 PM PST
Given that the ALV uses an 8-segment wheel vs the A model's 6-segment wheel, I gather that it probably runs faster, though that doesn't automatically dictate fewer rainbows. However, David Stone was clear in this review that he saw no rainbows at all on the 51ALV, and very few on the 51A. Optoma has for a long while been on the forefront of reducing rainbow effect, so if you're married to the benefits of single-chip DLP vs. a 3-chip design in this price class (such as an 3LCD projector) and are sensitive to rainbows, this is a good choice.
Dani Posted Jul 15, 2019 1:26 PM PST
Hello, someone has how to calibrate the optomaUHD51ALV? AND ANOTHER THING THE BLACK LEVELS ARE ALAURE AT 51A?
Ray Nist Posted Aug 2, 2019 9:27 PM PST
Hi - can you post the picture setting and values you used after you calibrated the projector?
Rob Sabin, Editor Posted Aug 5, 2019 8:05 AM PST
Hi Ray. We actually do not have the calibrated settings preserved for our tests on these two projectors. Saving those settings is a practice we've only recently begun, and will begin posting them with our reviews going forward.
Racki Posted Aug 19, 2019 3:50 PM PST
Hi I am bit confused which projector to buy between Optoma UHD51ALV and Optoma UHD60. As I heared there is no much difference in sharpness and clarity of the images between them.

But I like UHD60 and thinking of purchasing this, my only worry is about its HDMI port issues (that stops working suddenly) which we can see reported in the reviews.

Is that issue still exists?

Or with out taking risk can I purchase UHD51ALV ?
Juan M Busso Casati Posted Aug 20, 2019 7:39 PM PST
Can you test this one vs BenQ HT-3550? I have an Optoma HD27, and I want to upgrade to one of these two. I use it mostly for 4k movies and 3D Blu-rays. Which one is better?

Rob Sabin, Editor Posted Aug 21, 2019 7:18 AM PST
Juan, we presently have no plans to face off these two models and no longer have a UHD51 or 51ALV sample in house. However, considering the close pricing it's something we'll consider. In the meantime, I'd suggest doing a comparison on our Find a Projector database to see the basic specs side by side, and also read the individual reviews to see both the measured brightness vs the specs as well as the different features and subjective image comments. One thing the BenQ has going for it is that it is a brand new model that represents BenQ's latest algorithms for managing HDR tone mapping. Given the way HDR tone-mapping has advanced among all the manufacturers since the introduction of these Optomas, that might suggest a better-tuned result out of the box with a newer model that's been well reviewed like the HT3550 has. But there may be other characteristics or advantages in the Optoma that count more for you.

Post a comment

Commenting on this article is easy and does not require any registration. Your email address is necessary for you to activate your comment once it has been submitted. It will not be shown to other site viewers. ProjectorCentral reserves the right to remove any comment at any time for any reason. Foul language is not permitted, nor are personal attacks. No HTML allowed. All comments should remain on topic.

Name:

Email Address:(used only to confirm your comment)

Your Comment:

(Enter the numbers as they appear to the left)